The anti-lift lock device manufacturer tells you to choose a brand lock produced by a manufacturer with quality assurance; the anti-lift lock device manufacturer tells you that secondly, you should pay attention to buying a lock that opens in the same direction as your door; pay attention to the width of the door frame, The door frame on which the ball lock and handle lock can be installed shall not be less than 90 cm.

The anti-lift lock device manufacturer tells you that the more important point is that if you choose a handle lock, the handle of each functional lock should be the same, and the shape of the panel should be consistent to make the room more coordinated; it is worth mentioning that the general door lock is suitable for door thickness 38~ 40mm, but can be extended up to 50mm.
Use and care:
Anti-lift lock device manufacturers tell you not to drip oil into the lock cylinder. If the key is not flexible to open, you can put some pencil lead chips in the keyhole; if you accidentally turn the safety of the spherical lock house 90 degrees clockwise, it will be the safety, so you can only open it with the key, you need to turn the safety 90 degrees counterclockwise. recover. The anti-lift lock device manufacturer tells you that you need to correct a common misunderstanding of consumers. Do not wipe the lock body and handle with a damp cloth to avoid rust; After the door is closed, let go; the anti-lift lock device manufacturer tells you not to hit the door hard, otherwise it will reduce the service life of the lock.